We're back with some lovely photos of the last few busy weeks, including Renegade, SF Gift, our mid-year CBL retreat, and some new work.
Teaching Old Tools New Tricks
We have a saying in the jewelry business - you can never have too many tools! OK, so that’s not an official saying, but it should be. When a friend recently gifted me a bunch of their old jewelers' tools - some of them doubles of tools I already had - I didn't think twice; of course I could make them work! Jewelry tools are expensive, highly specialized and become like beloved members of your family, albeit cold, hard, steel members of your family. Here in San Francisco, our cold, damp “Summer” can coat your loved ones in a layer of rust. Such was the case with this group of tools.
I've refinished a number of tools over the years - hammers, pliers, tweezers - these are easy - all flat planes and smooth surfaces, so I can sand & file off any rust or pits in the steel, apply 3-in-1 Oil and Presto! Good as new. But files are a different story. Some of these new-to-me files had wax and metal filings caught in their teeth (pretty normal by jewelers’ standards), but a few had rust deep in their grooves. This presented a different problem; I couldn't just sand or file the rust off without damaging the teeth of the files. What was I to do? To the Internets!
Files bubbling in their vinegar solution.
According to many internet searches, I would need either phosphoric acid (requiring a trip all the way out to Lowes or Home Depot) or sulfuric acid (corrosive to soft tissue like, um, your skin and corneas, and also historically known as Oil of Vitriol - really rolls off of the tongue, doesn't it?) I am not that patient and I really wanted to clean these files soon. So what was the solution? Vinegar. Regular distilled vinegar. Available at the Walgreens right next door to my studio - so convenient! And it helped me to come up with vinegar’s new slogan - Vinegar - What Can’t It Do?
Tools soaking in their vinegar solution and starting to look gross/cool.
A lot of what I read said that I should let the tools soak for up to 4 days, but I started to see results after leaving them overnight. I pulled out a few of the less rusty pieces after a day, and left the rest to soak a few days more.
Tools soaking for a couple of days.
If you decide to try this yourself here are a few Dos and Don’ts:
Files soaking in vinegar. Check out the residue collecting on them!
Do: Remove the wooden handles from your files before soaking. It’s a little extra step, and it avoids moisture being trapped inside of the handle. I was impatient and didn't do this to all of my files. I should have.
Do: Use a file card before soaking to remove any excess matter and use it again afterwards to clean out any remaining rust from the grooves and teeth of your file. This will help prevent any rust from redeveloping after you soak them in the vinegar.
Do: Oil the hell out of your tools after doing this to protect them. If you live in a damp environment (Seattle, Portland, Hawaii, etc.), you should oil your tools regularly anyway.
Cleaned and oiled files. Ready to create more jewelry magic.
Don’t: Do this unless you can be on hand to monitor their progress - i.e. don’t leave these to soak over a long weekend away.
And there you have it. Have you tried this method before? Let me know how it turned out!
Tomales Bay and Beyond
The view of Hog Island and Piglet from my kayak.
Whenever I need a getaway or break from running note•ify and gift•ify, I head out to West Marin to Tomales Bay and the surrounding areas. My first stop is usually for oysters and lunch at The Marshall Store located on Route 1 in Marshall on the shores of Tomales Bay. I always go on a weekday to try and beat the crowds, but never on a Tuesday because they are closed.
The view while you eat your oysters at The Marshall Store
Oysters from The Marshall Store
The Marshall Store
Another delicious stop with a fabulous view is Nick's Cove. Nick's also has cottages if you ever need a luxurious spot to stay on the coast.
The pier at Nick's Cove
The Miller Park Boat Ramp next to Nick's Cove is also where you can go kayaking. If you have your own kayak, go for it, but if not, check out Blue Waters Kayaking. They lead all types of kayaking tours. We opted for the Tule Elk tour. A herd of 400 Tule Elk inhabit the northern part of the peninsula and can be seen from your kayak. This was a great half day tour that took us out into Tomales Bay past Hog Island and back through the oyster fields in the bay.
Heading out into Tomales Bay in the fog
The elk on the hill
Off the bay, out the kayak, and heading into Nick's Cove for a drink! Great view of Hog Island from here - that's Piglet on the left.
Other places to see in the area include:
Point Reyes Station
Stop off in Point Reyes Station for shopping. I recommend the Coyuchi Outlet for organic linens at a discount. Toby's Feed Barn for a unique range of goods from fresh, local organic produce to gifts, garden supplies, pet food, hay and grain. And of course, no trip to Point Reyes Station is complete without a trip to Tomales Bay Foods, home to Cowgirl Creamery and many other delicious food purveyors.
The Point Reyes Lighthouse and Beaches in the Point Reyes National Seashore
I typically head out to the Point Reyes Lighthouse to get a good view of the whales when they migrate through the area. But it is a great place to visit anytime, just make sure to check that it is open. There are a variety of beaches to visit, check here for all of their attractions.
The lighthouse from the top of the MANY stairs down.